🌐 İhracat kalitesinde soğutma ve dondurma ekipmanları · 60+ ülkeye gönderilir 📞 +86 133 5714 9418  ·  💬 WhatsApp +86 133 5714 9418  ·  ✉ sales@lvano-tech.com
Ana sayfa / Knowledge / Containerized & Modular Cold Storage: Design and Sizing

Containerized & Modular Cold Storage: Design and Sizing

Why containerized cold storage

A containerized cold room is a refrigeration plant built inside a 20 ft or 40 ft ISO container — insulated panel walls, floor, doors, evaporator, condensing unit and controls pre-installed. It ships to a port or farm and runs within days, avoiding on-site civil work. Ideal for fish landing sites, farms, mines and disaster relief.

Sizing by container

ContainerUsable volumeTypical loadRefrigeration
20 ft~28 m³8-12 t (0°C)4-7 kW
40 ft~60 m³18-25 t (0°C)9-15 kW
40 ft (-18°C)~60 m³14-20 t frozen12-20 kW

Design essentials

  • Insulation: 100-150 mm PU panel for 0°C; 150-200 mm for -18°C, with vapour barrier.
  • Floor: load-bearing insulated floor (avoid ground heat ingress) rated for forklift.
  • Refrigerant: R452A / R448A (low-GWP) or R290 for small units; R134a common.
  • Power: confirm 220/380 V, 50/60 Hz at destination before build.

Frequently asked questions

Q: How fast can it be operational?
A: Once placed on a levelled pad with power, commissioning takes 1-2 days.

Q: Can it hold -18°C in hot climates?
A: Yes with 150-200 mm insulation and a T3-rated condensing unit; add a shaded, ventilated location.