🌐 Equipamentos de refrigeração e congelamento de padrão exportação · enviados a 60+ países 📞 +86 133 5714 9418  ·  💬 WhatsApp +86 133 5714 9418  ·  ✉ sales@lvano-tech.com
Início / Knowledge / Freeze-Dryer Low-GWP Cold-Trap Retrofit: R452A / R448A

Freeze-Dryer Low-GWP Cold-Trap Retrofit: R452A / R448A

Why retrofit the cold trap

Freeze-dryer (lyophilizer) cold traps commonly use R404A/R507 (GWP ~3900). As F-Gas rules and buyer ESG push low-GWP, retrofitting the trap to R452A or R448A cuts refrigerant GWP substantially without a full redesign.

Options

  • R452A (GWP ~698): close R404A substitute, POE-oil compatible, moderate charge adjustment.
  • R448A (GWP ~1273): alternative blend; verify compressor rating and glide behaviour.

Retrofit checklist

  • Confirm the compressor is rated for the new blend and oil.
  • Recover, evacuate, and recharge to the new specified mass.
  • Re-label and update documentation for customs and compliance.

FAQ

Q: Is it a drop-in? Near-drop-in with charge and oil checks; not a blind swap.

Q: How much GWP reduction? From ~3900 (R404A) down to ~700–1300 depending on the blend.