🌐 Peralatan refrigerasi & pembekuan grade ekspor · dikirim ke 60+ negara 📞 +86 133 5714 9418  ·  💬 WhatsApp +86 133 5714 9418  ·  ✉ sales@lvano-tech.com
Beranda / Knowledge / Seafood & Shrimp IQF Freezing Line: Design Essentials

Seafood & Shrimp IQF Freezing Line: Design Essentials

Why IQF matters for seafood

Individual Quick Freezing (IQF) freezes each piece of shrimp or fish separately, so product stays free-flowing and portionable instead of arriving as a solid block. For export seafood this protects grade, price and re-sale value. The target is a product-core temperature of -18 °C reached within 15-40 minutes depending on piece size.

Key design parameters

  • Throughput: shrimp lines commonly run 0.5-2 t/h; belt load 8-15 kg/m².
  • Core temperature: -18 °C at the thickest point; surface must pass through the -1 to -5 °C maximum-ice-crystal zone fast.
  • Freezing time: 15-25 min for peeled shrimp, 30-40 min for whole fish.
  • Pre-cooling: chill to 0-4 °C before the tunnel to cut freezer load.

Typical equipment chain

Receiving → washing → pre-chiller (0-4 °C) → IQF fluidized-bed tunnel → glide/contact freezer (optional) → -18 to -25 °C cold storage → packing. The tunnel uses high-velocity cold air (-30 to -40 °C evaporating) to fluidize and freeze product on a perforated belt.

Refrigeration capacity example

For a 1 t/h shrimp line, total refrigeration load is roughly 80-120 kW at -40 °C evaporation: about 60-80 kW for the tunnel, plus pre-chill and cold-storage pull-down. Common refrigerant paths are R452A / R448A (low-GWP HFO blend) or an ammonia / CO2 cascade for larger plants. Size the compressor rack for the -40 °C suction, not the storage temperature.

Common mistakes

  • Under-sizing evaporator area → slow freezing, large ice crystals, soft texture.
  • Skipping pre-chill → 30-50% higher tunnel load.
  • No redundant compressor → a single fault stops the whole catch.

Frequently asked questions

Q: Can I use a blast freezer instead of IQF?
A: A blast freezer freezes in blocks; product clumps and must be broken. IQF is preferred for shrimp and fillets sold by weight.

Q: Which refrigerant is best for export?
A: R452A / R448A keep you under low-GWP rules; ammonia / CO2 cascade is the lowest-GWP choice for big plants but needs machinery-room compliance.