Plate vs Shell-and-Tube Heat Exchanger: How to Choose
How they differ
| Aspect | Plate (brazed/gasketed) | Shell-and-tube |
|---|---|---|
| Size & weight | Very compact, 1/4 the footprint | Bulky, heavy |
| Heat-transfer efficiency | High (turbulent, small ΔT ~1-2 K) | Lower (ΔT 3-5 K) |
| Pressure / temp | Brazed up to ~30 bar; gasketed limited | Handles very high pressure |
| Ammonia (NH3) | Not brazed plate; gasketed only with NH3-safe gaskets | Standard for ammonia |
| Maintenance | Gasketed can be opened/cleaned; brazed is sealed | Tube bundle pull-out, cleanable |
| Cost | Lower for small duties | Lower for very large duties |
When to pick which
- Brazed plate: water-to-water, glycol, clean fluids, tight space — chillers, heat recovery.
- Gasketed plate: duties needing periodic cleaning or duty change, non-ammonia.
- Shell-and-tube: ammonia systems, high pressure, dirty/particulate fluids, very large duties.
Frequently asked questions
Q: Can I use a brazed plate exchanger with ammonia?
A: No — copper brazing is incompatible with ammonia. Use shell-and-tube or NH3-rated gasketed plate only.
Q: Which is cheaper?
A: Plate wins for small/medium clean duties; shell-and-tube wins for large, high-pressure or ammonia duties.